removing pipe dents

[93works]

hi guys tryied a search, any know ledge on removal of a dent in a tuned pipe???? :thumbs:

[nitroRCs]

Normaly works, can go wrong though.

Take of your pipe and cork the stinger with something, or stickytap ect...

Then fill your pipe up (to the top) with water and place in the freezer, this makes the water turn into ice and expan, causing it the pop out the dints...

Good Luck...

[93works]

the pipe is a ninja 2053 in case any one wants to know, would i need to plug the main hole and fuel tank line also??? cork ha any other idea's i dont drink wine :D

[expertbasser]

the pipe is a ninja 2053 in case any one wants to know, would i need to plug the main hole and fuel tank line also??? cork ha any other idea's i dont drink wine :D

You'll want to plug ALL the openings. Duct tape, just anything to keep the unfrozen water from escaping until it freezes. KEEP AN EYE on it after the freeze process starts!

[Joe V]

After all that if the dent is still there run a little hot water over the dent, wipe it off and refreeze, I have seen this work really good.