caster k8t question

[neill91_maui]

i bought a used caster k8t my question is what setting should the high speed needle and low speed needle be set at from the screwed down position.
thanks

[NeoBart]

What engine?

[neill91_maui]

its the stock .25 engine

[cheesecake]

Do you know if its the force 25 or the go 25

[neill91_maui]

no i dont know

[cheesecake]

hmm i would set the needles at flush and work my way around but if your not an experienced tuner its not recommended. i will ask around to see what i can find

[neill91_maui]

thank you

[bc24fl]

You should have a Force .25.

Here's the manual with needle settings and more.

http://www.ofna.com/pdf/eng-force25.pdf

[neill91_maui]

You should have a Force .25.

Here's the manual with needle settings and more.

http://www.ofna.com/pdf/eng-force25.pdf

thank you