burnt out?

[nitroRCs]

hey guys, i found that my radio when i turn it all on it just goes to failsafe and even though im puting through imputs from the transmitter it still wont move the servos.

...i have checked the following:
batteries
reciever plugs
crystals

...the only thing i can think is a burnt out reciever is this possible?...ITS HARDLY BEEN USED!:cussing::cussing::cussing:

ANY help would be appreciated:claphat:

[BIG RED]

try a different rx pack

[nitroRCs]

i ahve tried different "batteries" and it still wont wrk

[rogma]

What Raido do you have?

[Dave D]

I have had receivers go out and I have had them go bad due to impact damage and I have also seen it where wires had come disconected inside of the transmiter.
Best bet try your radio with another reciever to see if it will work. If it works it is the reciver. If it doesn't find another transmiter and try it with your reciever to see if that works. you can also disconnect th fail safe and try it that way.

[nitroRCs]

tried it all...its the reciever...

[pantera nitro]

mitch,

i missed the post office on friday arvo so i'll send you my old receiver on monday so you should have it on tuesday. hope it helps

MikeC

[nitroRCs]

thanks heapz mike...that will give me a spare :)

[pantera nitro]

sent bud.