PDA

View Full Version : Lrp Esc


ifishinxs
05-04-2008, 10:46 PM
This is my first post guys...I hope someone can be of assistance.

I just picked up a used Losi XXXT.

Heres the issue..No brakes and no reverse. The LRP ecs is, or appears to be new. The motor is a new Trinty 27 turn stock job. The Radio is a JR that usually comes with the Lost RTR trucks. The truck runs great in forward...Just no reverse! I trimmed the throttle out in each direction. Still nothing..At this point I'm looking at the radio it self..But I'm not 100% sure thats the problem and I don't have another radio or receiver to swap out for a check.. HELP

Grahamton
05-04-2008, 10:52 PM
Sounds like you just need to program the ESC. If you go to the LRP site and find the manual for your ESC it will tell you how.

RC_KAOS
05-05-2008, 04:03 AM
Which LRP ESC is it?

ifishinxs
05-05-2008, 04:19 PM
Which LRP ESC is it?


AI super reverse Digital model#8320.

I was told that it was plug and play..Evidently not so!


Thanks for your help

Grasshopper
05-06-2008, 09:47 PM
You MUST re-program the ESC as Graham mentioned. If you do not have the original paperwork, you can contact Team Associated / LRP Tech Support at : http://www.teamassociated.com/racerhub/techhelp/techlrp_esc.htm

click on contact us on the left of the page.

Phone: (949) 544-7500
Mon to Fri, in the hours of 8:00am to 4pm, PST (California time), excepting holidays

or : http://www.teamassociated.com/feedbackresult/forms/contacting.htm

click on I need a manual or LRP instructions. (http://www.teamassociated.com/feedbackresult/forms/contacting.htm#9)

It's a very easy procedure once you have the instructions.