Rc10gt2 (rcx)

[RC_KAOS]

It’s for real! Associated’s long-awaited follow-up to the most popular 2WD nitro truck ever is finally here. The RC10GT2 is an all-new-from-the-ground-up design, but maintains the winning suspension geometry of the original GT. Quick-change hubs are standard equipment, and unlike pin- and hex-interface designs that require an extra twist to get the rim lined up, Associated’s setup is not position-sensitive. An upper deck lends the chassis extra stiffness, and a separate rear brace connects the trans to the upper deck. The transmission uses a stepped idler gear that allows for a more compact gearbox, and the new slipper assembly uses dual keyed pads like theB4/T4 setup. More info soon!

http://209.2.68.15:8011/pics/capture_00063.jpg
http://209.2.68.15:8011/pics/capture_00064.jpg
http://209.2.68.15:8011/pics/capture_00065.jpg

Cheers

[AZRCaddict]

http://i76.photobucket.com/albums/j8/MrShookie/DCP_1571.jpg
http://i76.photobucket.com/albums/j8/MrShookie/DCP_1568.jpg
http://i76.photobucket.com/albums/j8/MrShookie/DCP_1570.jpg
http://i76.photobucket.com/albums/j8/MrShookie/DCP_1567.jpg

Haha beat cha!

[J_Bone]

Thief...

[kawasakirider]

That body looks like the parma pleaser for the savage revo and tmaxx lol

[RC_KAOS]

Yeah, i much perfered the older bodies like on the RC10T3
http://www2.gpmd.com/image/a/ascc0748.jpg

Cheers

[imported_z3usX5]

im not a fans of these, but that looks pretty sweet....

[AZRCaddict]

I like it, I love watching the gas trucks at our track since our track is built for 1/8th. You have to have good throttle control.

Most of there truck bodies look the same to me. :?

http://www2.gpmd.com/image/a/ascc6139.jpg
http://www2.gpmd.com/image/a/ascc0070.jpg

[J_Bone]

I like 1/10 scale trucks. This is my next purchase! :buttrock: :nodding: :nodding:

I think more people should race them, it will teach them how to drive better. :0pouce:

[AZRCaddict]

I like 1/10 scale trucks. This is my next purchase! :buttrock: :nodding: :nodding:

I think more people should race them, it will teach them how to drive better. :0pouce:
I know what my next purchase will be 8) :twisted:

[RC_KAOS]

It looks very well done, im sure it will give Losi a run for its money. But why get rid of the blue chassis?

Cheers

[Fluke]

because blue may be beautiful but black is bad

[J_Bone]

It looks very well done, im sure it will give Losi a run for its money. But why get rid of the blue chassis?

Cheers
A run for there money?? AE has been kicking ass and taking names!! Look at the last few years...Very few Losi's placing in the top 3... :nono2:

[kawasakirider]

it's all in the driver.......

[J_Bone]

it's all in the driver.......

What if the drivers are equal?? Then it's in the vehicle.

[RC_KAOS]

it's all in the driver.......

What if the drivers are equal?? Then it's in the vehicle.
Yeah, set-up of the vehicle

Cheers

[rubber side up]

isnt that like 90% losi xxxnt anyway??? looks it..

[RC_KAOS]

Yeah, it looks close to it.

Cheers

[J_Bone]

Looks can be deceiving! The chassis might look like a Losi because it's a double deck, but it was actually designed from the TC3 with it's Radio tray.
The geometry is like the T4, not the Losi. It's an AE truck!!

[AZRCaddict]

I really want one of these bad boys!

I made a list of what I have read is good and plan to put in it if I get one.

O.S. .12 CV-R
JR RS310 3 Channel Reciever (I have a JR XS3)
JR270
Futaba 29351
1100mAh
Ofna Universal 1/10th Starter Box

If you have any ideas on anything better feel free to suggest it. (FYI I dont have alot of money that is why I did not put every top of the line thing in my list)

[RC_KAOS]

Tower Hobbies has them on their website now due Mid Aug

Cheers

[AZRCaddict]

I debating on getting a RC10GT2 or a AD2. I like AE's stuff plus I have factory support at my track with Ryan being there. :confused:

[RC_KAOS]

Didn't you just get a Kanai 2?
Over the two I would go the AE kit. Parts are everywhere for them and if this new kit is better than the old one, than it will be one killer kit

Cheers

[AZRCaddict]

Didn't you just get a Kanai 2?
Over the two I would go the AE kit. Parts are everywhere for them and if this new kit is better than the old one, than it will be one killer kit

Cheers
Yeah I just got a Kanai II, I got a killer deal on it and with me selling my Mayhem it only costed me $20 bucks. 8)

Last night I raced my friends AD2 and loved it so now I need a rut rut. :nodding:

[ImGoinRCn]

Any of you guys ever get around to buying one? Just curious about them.

[AZRCaddict]

Yeah I got one a little while ago, it has US Screws and I only have metric wrenches so I have to order some. Otherwise it would already of been built! I plan on racing my K2 and GT2 and the Nitro Challenge.